------------------------------------------------
CIVPROG 2.00
------------------------------------------------

CIVPROG can set the operating frequency of an ICOM (or Perseus) receiver,
according to a table you can load, modify and save on a CSV file.

Select a line, the relative frequency will be set on the receiver
according to the AUTO, TIMING, SCAN or SCHEDULE mode.

Set a frequency on the receiver, if that frequency is in the table
it will be automatically selected.

Lines with UTC time (hhmm-hhmm) specified will have a color indicating if
the station is currently active.
This can be useful even when CIVPROG is connected with no receiver.

You can use .CSV files "ready-to-use" (as the EiBi schedule, available at 
the same GuindaSoft RADIO page), you can edit existing .CSVs 
(i.e. with the freeware GuindaSoft Lister), you can create new .CSV files 
directly with CIVPROG.


------------------------------------------------
How to use
------------------------------------------------

- load the CSV file and edit the frequencies (double-click to edit the data)
- save the file

- press the "Settings" button
- select the receiver (if not in list, select "IC-generic")
- select the RX address (the default value is set by selecting the receiver)
- select the COM port of the PC
- select the baud rate
- save pressing OK

- press the "Connect" button


---------------------------------------------------------------
Dialog Box "Operating Frequency"
---------------------------------------------------------------
It is possible to show and modify the Frequency and the Mode set
on the receiver.
Pressing the "Add" button, a line with the displayed Frequency 
and Mode is appended to the table.


---------------------------------------------------------------
"Auto" mode
---------------------------------------------------------------

- press the "Auto" button

Select a line (up/down arrow, click, mouse wheel) and the relative 
frequency will be set on the receiver.
Set a frequency on the receiver and, if that frequency is in the table,
it will be automatically selected.


---------------------------------------------------------------
"Timing" mode
---------------------------------------------------------------

- press the "Timing" button

Lines with UTC time (hhmm-hhmm) specified will have a color indicating if
the station is currently active.


---------------------------------------------------------------
"Scan" Mode 
---------------------------------------------------------------

- select the lines to scan; no line selected means: "select all"

- press the "Scan" button

Selected frequencies will be sent to the receiver with an interval
defined in the "Settings" dialog box.


---------------------------------------------------------------
"Schedule" Mode
---------------------------------------------------------------

- select the lines to schedule; no line selected means: "select all"

- press the "Schedule" button

Selected frequencies will be sent to the receiver according to the time activation.

Es: kHz      UTC
    1000  1000-1059
    2000  1100-1159
    3000  1200-1259


---------------------------------------------------
Sending the frequency to the receiver - Manual mode
---------------------------------------------------

- select the line on the table and press the "Set Frequency" button

or

- select the line on the table and select the menu "Comm --> Set Frequency"

or

- select the line on the table, right-click and select "Set Frequency"

or

- select the line on the table and double-click the line number


---------------------------------------------------
Sending the frequency to the receiver - Timing mode
---------------------------------------------------

- select the line on the table and double-click


-------------------------------------------------
Sending the frequency to the receiver - Auto mode
-------------------------------------------------

- select the line on the table (the frequency will be automatically sent)


------------------------------------------------
Notes
------------------------------------------------

CIVPROG needs the MSHFLXGD.OCX ActiveX component.
If the program doesn't start, copy the files MSHFLXGD.OCX 
in the same folder of CIVPROG.EXE, then run "REGSVR32 MSHFLXGD.OCX".

Connect a PC serial port with
- the RS232 port of the receiver using a "straight" RS232 cable, not a "cross" or "null-modem" cable.
or
- the CI-V port of the receiver using a CT-17 cable 


------------------------------------------------
Disclaimer
------------------------------------------------

This program is released for non commercial use.
The author cannot be held responsible
for any kind of damage that occurs
while using this program in any way.

CIVPROG is free!
Download the last version from:
http://guindasoft.impreseweb.com/radio/radio.html